Sponsors

Intergalactic Sponsors

Logo_TUDelft

Delft University of Technology, also known as TU Delft, is the largest and oldest Dutch public technical university, located in Delft, Netherlands. With eight faculties and numerous research institutes it hosts over 19,000 students (undergraduate and postgraduate), more than 3,300 scientists and more than 2,200 people in the support and management staff.

RVB_Safran_Aero_Prop_Prod

APP develops and manufactures ignition systems for space launchers. Those launchers are invaluable, both for science as well as for our daily lives. Navigation, weather forecasts, telecom and disaster control can hardly be done without satellites. Rockets bring satellites to their destination: in orbit around the earth. APP supports project Stratos and DARE with valuable knowledge on propulsion systems.

Air_Liquide.svg

Air Liquide is a multinational company which supplies industrial gases and services to various industries including medical, chemical and electronic manufacturers. Air Liquide sponsors DARE with the Nitrous Oxide required for testing and launch of the Stratos III rocket. Furthermore, Air Liquide provides DARE with Liquid Oxygen and storage dewars for cryogenic rocket motor development.


Orbital Sponsors

eriks website

ERIKS is an international industrial service provider offering a wide range of high-quality mechanical engineering components and associated technical and logistics services. ERIKS helps DARE in the development of a cryogenic rocket engine.

NIOfficialLogo

NI provides powerful, flexible technology solutions that accelerate productivity and drive rapid innovation. From daily tasks to grand challenges, NI helps engineers and scientists overcome complexity to exceed even their own expectations. NI provides DARE with the measurement and control system for tests and launches.

logo Jeveka-liggend met tekst kort [pms302]

For more than 75 years, Jeveka is the leading specialist in fasteners and tools. Jeveka supplies fasteners and advice to DARE. The Stratos III rocket will be held together using high-quality fasteners provided by Jeveka.


Hypersonic Sponsors

teesing

Teesing offers total solutions for (high-tech) applications that relieve demanding customers and enable them to continuously meet the demands of their market. Teesing offers a complete package of products and services related to the transport, of gases and liquids from the source to process. Teesing sponsors DARE with components and design advice.

g3

Airborne combines know-how of process automation with experience in hands-on manufacturing of composite parts. This way Airborne is able to commission bespoke machines, to manufacture composite structures for the aerospace market at low cost. Airborne produces the Stratos III composite oxidizer tanks.

stcorp-logo2

Science [&] Technology Corporation (S[&]T) creates R&D Solutions for Space, Science and Defence. S[&]T'ers in their offices in The Netherlands and Norway are hard at work, sensing problems and developing solutions. They specialise in Sensing and Control Systems, Scientific Data Processing, Intelligent Software Applications, and Technical R&D Consulting.

Stud_2.0

StuD is a not-for-profit organisation. The aim of the StuD Fund is to provide financial support for projects designed to benefit the students of Delft University of Technology. The StuD Fund provides Project Stratos with funds to perform full scale engine tests.

Teijin BL above BS fc rood

Teijin Aramid is the global leader in aramid technology. Their technology – which includes their aramid materials Twaron, Sulfron, Teijinconex, and Technora – is used in our rocketry systems, for example for parachutes and ballistic protection.

logo

Septentrio designs, manufactures and sells highly accurate GPS/GNSS receivers, for demanding applications requiring accuracies in the decimeter or centimeter range, even under difficult conditions. Septentrio provides the Stratos III rocket with a highly accurate GNSS receiver.

altium logo

Altium Designer is used by our electronics team to design our printed circuit boards (PCB). By incorporating all the tools we need into a single, stress-free user interface, Altium Designer dramatically increases our design successes, while reducing overall design times.

gbs

GBS is a company that specialized in manufacturing complex parts with high precision. They have provided parts that are vital for project Aether. Furthermore their workshop “design for production” trained our members in designing parts for production to increase the effectiveness of production within DARE.

ANSYS logo w-blur-300dpi

ANSYS is the global leader in engineering simulation. They help the world’s most innovative companies deliver radically better products to their customers. The Stratos III team is using ANSYS Fluent to perform a CFD analysis on the combustion chamber.

716c97_2bb981606aad4baca0742946034095cf

Dassault Systèmes provides the project Stratos team with the latest CATIA on the 3DEXPERIENCE platform. Furthermore, Abaqus is used to do Finite Element Analyses (FEA) on the most critical parts of the rocket.


Supersonic Sponsors

NLR_Logo+payoff_1000px
NSO logo klein
EC logo+ CMYK 120cm
logo holland packing
NM logo
ALE logo
turbo-mitsu
MATERIAL logo
3M-Omnimark (1)
XSens_logo_staand_2012
logo
mtb3d1-logo-1443561346
logo-Rada
lemo logo
TennantsGMBH-logo
JTW-logo-new
unnamed
Logo Carbonline www1
logo_2r_zwart_800